Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

单矢量水听器估计目标方位的方法与实验

为评估基于单矢量水听器的方位估计能力,在黄海海域对矢量水听器进行实验。矢量水听器吊放于接收船尾部,采用平均声强器和复声强器方位估计方法,并提出以概率密度值最大的方位角作为目标方位估计值的具体处理准则,对恒定方向、匀速行驶的目标船方位进行估计,并求出两种方法的方位估计误差。结果表明,水听器布放深度10 m时,对正横距离为0.42 km的航速10 kn的目标船,平均声强器方法的水平方位角估计误差18°,极角估计误差为5°,可以在离目标船最远1.17 km处估计其方位;复声强法的水平方位角估计误差为13°,极角估计误差为8°,可以在离目标船最远2.35 km处估计其方位。在有接收船的噪声干扰情况下,复声强器比平均声强器方法估计的方位更准确,可以对更远处的噪声源进行方位估计。     

Amphiphilic Copolymers of Polyfluorene Methacrylates Exhibiting Tunable Emissions for Ink‐Jet Printing

Functionalized polyfluorene receives more and more attention due to its wide applications. Here, the syntheses of three novel polyfluorene‐based methacrylate macromonomers exhibiting a vast flexibility for further applications are reported. Their emissions strongly depend on the end groups and thus the macromonomers provide blue, green, and red emissions simultaneously with the same excitation light of 365 nm. Their well‐defined copolymers with 2‐(dimethylamino) ethyl methacrylate via reversible addition‐fragmentation chain transfer polymerization are investigated in detail. These copolymers exhibit high quantum yields in solid film (up to 0.8), and self‐assemble into photoluminescent nanoparticles in aqueous solutions with pure blue, green, and red emissions. By simply mixing them, perfect white light emission with high quality is obtained. These aqueous nanoparticles solutions are ready for ink‐jet printing to produce exquisite bright and colorful fluorescent pictures.

     

A variational solution of 2-D sound-structure interaction problems

Based on the fluid-structure coupling theory, a localized variational principle for analyzing the sound radiation from elastic structure submerged in water due to harmonic excitations is presented. It will be a powerful tool to formulate various numerical methods for steady response of structural-acoustic systems. By means of this variational principle a hybrid element method, in which an analytical solution valid in most of the surrounding water is incorporated with finite elements distributed in the structure and its neighboring water, is devised. Computational examples are then given to demonstrate its high accuracy and time saving. The project supported by the National Natural Science Foundation of China (10172038) and the Doctoral Program Foundation of Institution of Higher Education of China (20040487013). The English text was polished by Yunming Chen.     

Foam Self-Clarification Phenomenon: An Experimental Investigation

This paper is focused on the capabilities of gas–liquid foams to attenuate acoustic waves. It is postulated that the sound attenuation phenomenon in foams is largely governed by the hydrodynamic resistance of the Plateau-Gibbs channels (PGC) to the flow of liquid through them. It is shown that the addition of solid particles to gas–liquid foams has opposite effects depending on the concentration of the added solid particles. As long as the concentration of the added solid particles is smaller than a certain critical value the sound attenuation coefficient increases and as a result in the sound velocity decreases. However, if the concentration of the added solid particles becomes larger than this critical value the attenuation coefficient decreases and the sound velocity increases. When the concentration of the solid particles reaches some critical value, the particles block the Plateau-Gibbs channels and stop the filtration. As a result the attenuation coefficient of the sound wave decreases while the sound velocity, in such three-phase foams, increases. The point at which the sound wave stops attenuating and its velocity starts to increase is known as the point of self-clarification. Based on this postulate and on the results of our preliminary tests the present study provides a plausible explanation to the above-mentioned contradicting effect, and the self- clarification phenomenon.     

Analysis of regular and irregular acoustic streaming patterns in a rectangular enclosure

This study reports an experimental investigation of the non-linear phenomena of regular (classical) and irregular streaming patterns generated in an air-filled rigid-walled square channel subjected to the acoustic standing waves of different frequencies and intensities. The interaction of acoustic waves and thermoviscous fluids is responsible for these phenomena. The resonator’s walls are maintained at isothermal condition. Synchronized particle image velocimetry (PIV) technique has been used to measure the streaming velocity fields. The experimental results show that at a given excitation frequency, regular streaming flow patterns are observed up to a certain value of the excitation amplitude. As the amplitude increases beyond this limit, the regular streaming is distorted to an irregular flow structure. The regular and irregular streaming are classified in terms of streaming Reynolds number . It is found that for Re_s2<50, classical streaming flow patterns are established and then deform to irregular and complex shapes as Re_s2 exceeds 50.     

Exterior cloaking with active sources in two dimensional acoustics

We cloak a region from a known incident wave by surrounding the region with three or more devices that cancel out the field in the cloaked region without significantly radiating waves. Since very little waves reach scatterers within the cloaked region, the scattered field is small and the scatterers are for all practical purposes undetectable. The devices are multipolar point sources that can be determined from Green's formula and an addition theorem for Hankel functions. The cloaking devices are exterior to the cloaked region.     

Broadband acoustic cloaks based on the homogenization of layered materials

We present an analysis of acoustic cloaks based on the homogenization of two fluidlike materials, with an emphasis on periodically layered imperfect cloaks, by removing the singularities of the acoustic parameters required for ideal cloaks. The conditions that material layers should satisfy are systematically analyzed and critically discussed according to their feasibility.     

Combined Spectroscopic and TD-DFT Analysis to Elucidate Substituent and Acidochromic Effects in Organic Dyes: A Case Study on Amino- versus Nitro-Substituted 2,4-Diphenylquinolines

A combined spectroscopic and TD-DFT case study was performed, to identify a robust method to calculate the complex near UV/Vis absorption spectra of various amino- vs. nitro-substituted 2,4-diphenylquinolines, which vary strongly under neutral and successively acidic conditions. For this, different DFT functionals were tested for geometry optimization and the TD part to calculate the neutral and different protonated species in a fast screening approach, i. e. using single point calculations in an implicit solvent. Offset-corrected M06HF, hitherto only applied to polymers, was identified as a suitable method to reproduce the absorption spectra in a reasonable fashion for all different substitution pattern and all different protonated species at different pH values; moreover, the method properly predicts the energetic ordering of low-lying n-π* and ππ* transitions, which is decisive for the non-/emissive nature of the different compounds. In all, this might provide a valuable tool for computer-aided design of related classes of compounds.